Do not forget the cleaning details of car daily maintenance
It seems easy to clean the center console, a rag can get it. In fact you will find a little note, instrument, there are many "various obstacles" which need special tools to clean. At this time, you can find a number of different thicknesses of woods or rulers, trim one end to the tip style, and then wrapped in a clean cloth to clean inside.
Often forgotten ignition wires
We are all familiar with the spark plug, but the ignition wires are often forgotten by people. When the car is not easy to catch fire, increased fuel consumption, power and poor symptoms, it is recommended to check the ignition wire. Ignition wire ends are connected to the distributor and spark plugs, is the only path to pass to the engine. Due to its high frequency of use, the working environment is also relatively poor, will be very prone to aging, damage and other phenomena, causing ignition energy shortage. Experts suggest that the vehicle ignition wire replaced every twenty thousand kilometers.
Brakes also need to focus on
Brake disc surface is more smooth than the pads, susceptible to the impact of brake pads rough surface. So when check and replace the brake pads, we should also pay attention to the surface of the disc condition, if there is relatively clear scratches, proposed replacement of the brakes in order to avoid future trouble.
For other miantenance, you may know the hot car obd diag tools.
Here is the hot one.
KWP2000 ECU PLUS Flasher Description:
Connects to USB
Supports high speed ECU flashing
Led Indications for USB-power/CAR-power/rx/tx
Can read and write a lot more ECU's than the normal kwp2000 Software
How do you use the KWP2000 PLUS?
1.You need a computer. Installing KWP2000 Plus software.
2.Connect USB cable to your PC;
3.Connect to your car via standard 16-pin OBD2 connector;
4.Supports high speed ECU flashing
5.Led indications for USB-power Car-power/rx/tx
6.Support KWP2000+ software and other KWP/ ISO software
How to Read and Write data?
Read and Write
1.Click read button to read out the original data
2.Click write button and select the file you want to write
3.Save the file to you HD, edit or forward it -Follow the instructions on screen
4.switch off ignition and wait 10 seconds